Aggravated By False Alarms? Try These Tips For Using Home Security Motion Sensors In Phoenix
Have you ever been roused in the dead of night by a false alarm triggered by a home security motion sensor? Having your sleep disrupted is frustrating enough, but it’s even more frustrating when you can’t figure out what caused the alarm. Thankfully, false alarms are typically easy to avoid. Follow these straightforward suggestions for using motion-sensing equipment and see how the proper positioning and upkeep will go a long way to ensuring proper function.
How To Stop Motion Sensor False Alarms In Phoenix
A critical part of your home security, motion detectors typically get an unfavorable reputation due to false alarms. While motion detection is used in many tools like surveillance systems and lights, false alarms are most often associated with standalone units perched in corners of living spaces. To minimize false alarms, avoid installing them in places where they might be set off by the following:
- Pets jumping on furniture
- Turning of ceiling fans
- Curtains or drapes blowing from your HVAC fan
- Temperature changes due to heating systems or the sun’s rays
You also should keep an eye on upkeep. Weak batteries will impact performance and cause outages in time. Wired units might have a frayed or pinched wire. You also need to clean periodically, as spiders and other bugs like to congregate in corners. As you’re tidying up, verify the motion sensor cover is secure.
Notably, most modern systems can decrease false alarms prompted by pets by excluding animals less than 2 ½ feet tall and with a weight of 85 pounds or less. Review what devices can do before ordering to make certain you have the operability you want.
What’s The Right Spot For Phoenix Motion Sensors?
Keep home security motion sensors up high on walls so they are able to observe as much of your living area as possible, including windows and doors. While placing them near entry points might seem reasonable, this placement might limit the overall coverage area. Additionally, placing them near a warm, sun-splashed window could trigger sensors that operate by noticing heat fluctuations. Worthwhile home security installers will guide you on the best placement.
Best Uses For Your Motion Sensors
Detecting burglars is the principal job of motion sensors, but there are many other reasons to install them. Here are a few:
- Energy savings. Motion-sensing lights save energy by brightening only when people are present. You may even connect your sensor to a smart thermostat and change temperature levels based on whether your household is occupied.
- Keep track of kids. Motion sensors can update you when your children come home from school.
- Activate inside surveillance cameras. You can configure your indoor cameras to kick on if a motion sensor detects movement.
When implementing an advanced home defense system, you can establish all sorts of personalized automation with motion detectors.
Order Motion Sensors As Part Of Your Comprehensive Home Security Package in Phoenix
Enjoy the top-notch protection you want for your family with a comprehensive home security system in Phoenix from Secure24 Alarm Systems. Our dependable motion-sensing equipment can be synchronized with other integrated components like thermostats, lighting, and cameras. Dial (602) 649-6096 today and make your home a safer place.